Happy Monday! The weather is finally starting to warm up here and it looks like spring is on the way. Today, I want to share our latest plan: the Easton DIY Nightstand plan. Why “Easton”? Well, because Pottery Barn already claimed “Elliott”. 😉
This is a great nightstand that you can build for under $60. That means you can save a couple hundred bucks by building it yourself!
Easton DIY Nightstand Plan
Overall dimensions of this nightstand are below:
To build one Easton nightstand, you will need the following:
Materials
- Sheet Goods
- 3/4″ Plywood or MDF: [email protected]×4 ft
- Lumber/Millwork
- 2×2: [email protected]’
- 1×2: [email protected]’
- 1×3: [email protected]’
- 1×4: [email protected]‘
- Outside Corner Moulding
- Hardware
- 12″ Drawer Slides
- Cabinet Knob
Tools
- Tape Measure
- Circular Saw
- Miter Saw
- Drill/Driver
- Pocket hole jig (like the Kreg Jig)
- Brad Nailer
- Table Saw (optional)
All of our plans include everything you need to build a great nightstand from scratch.
- 21 pages of of complete assembly instructions
- Full dimensions for each component
- Detailed drawings